Adjustable height front and rear axle (threaded shock body).

If the vehicle is equipped with original sport suspension, the lowering indicated in this catalog will be relatively less significant.

When installing the suspension kit, the clearance between the tire/rim and the suspension strut must be checked. The minimum allowed space is 5 mm (0.2 inch). Otherwise, use certified wheel spacers.

Independent height adjustment at the lower mounts on the front shock absorbers.

The kit includes 2 upper camber plates on the front axle.

Installation requires the use of OE front suspension struts – they must be cut and welded as described in the provided manual.

In some cases, additional OE parts are required for mounting the suspension components. They are not included in the kit.

Includes M-Technik.

Suspension compatible only with a rear upper mount having an inner diameter of 78 mm – OEM number: 33521117657 or 33521126407.

For vehicles equipped with Nivo, it will be necessary to replace the rear upper mounts with the OEM parts: 33521117657 or 33521126407.

Height adjustment: Threaded shock body — adjustable on both axles.

OEM sport suspension: If the vehicle is equipped with original sport suspension, the achieved lowering will be slightly less than the indicated values.

Ground clearance: Check tire/rim–suspension arm clearance. Minimum 5 mm required. Approved spacers if necessary.