Streetec comp1 EVO black

STREETEC comp1 EVO piston compressor black incl. anti-vibration kit

12V Reciprocating Compressor
Duty Cycle: 100% @ 100 psi
Flow Rate: 1.76 CFM (cubik per minute)
Maximum 200 PSI = 13.8 bar
Fuse: 40A (not included)
L/B/H = approx. 27.5cm / 10.5cm / 17cm
1/4 stainless steel main lines with check valves
To ensure trouble-free operation of the compressor, the following points should be checked:

The compressor must only be operated with a 40 A fuse! Over or under amperage of the fuse is not allowed.
If installing multiple compressors, each compressor needs its own fuse.
The compressor may only be installed and operated in areas protected against water and heat.
The compressor is a dry rotor and therefore requires no lubricating oil.
The compressor can only be operated with a fully functional and fully charged vehicle battery, otherwise the compressor coil can be damaged by the high starting current (if the voltage is too low).
Ensure sufficient fixation and conductivity of the ground cable between the compressor and the body.
Always ensure an air supply sufficient fee.