Autostar Wheels
Autostar Wheels
Rasl'Bitume distributes the Autostar catalog, with stock actual stock shown on each product page. All our wheels are sold individually.
Autostar specializes in retro designs: wheels wheels that reflect the aesthetic codes of the 1960s to the 1980s for classic cars and modern classics. It is one of the few ranges to go down up to 12 and 13 inches, the sizes needed for Mini, Fiat 500s, and small classic sports cars.
Unsure about the bolt pattern, offset, or center bore? Contact us before you order, we will confirm the fitment with you.
Small diameters are the real specialty
Finding a new wheel in 12 or 13 inches with a design Finding a new period-correct wheel is a real challenge: most manufacturers have abandoned these sizes. Autostar keeps them in its catalog, making it an an option for anyone restoring a classic without wanting to move up to 15 inches.
The range then goes up to 19 inches for more modern fitments, while still offering the same aesthetic choices.
Check the bolt pattern first
Older vehicles use bolt patterns that are no longer commonly found on recent cars. A wheel with the right diameter but the wrong bolt pattern will not fit care, and there is not always a suitable adapter.
Each product page lists the bolt pattern, center bore, and offset. Take these measurements from your the original wheel rather than a technical data sheet found online: specifications may sometimes differ within the same model. If in doubt, contact us.
Frequently asked questions
Are these wheels suitable for a classic car?
That is precisely their purpose: the designs draw on the stylistic codes of the 1960s to the 1980s, and the range goes down to 12 inches. Nevertheless, check the bolt pattern and center bore of your vehicle on the product page before ordering.
Are they replicas of period wheels?
They are new wheels, currently manufactured, with designs inspired by They are new wheels, currently manufactured, inspired by classic designs. They are not sold as original parts and do not bear not the markings of historical manufacturers.
How do I measure my bolt pattern?
With 4 lugs, measure between the centers of two diagonally opposite holes. With 5 lugs, direct measurement does not work: it is better to use the the reference number of your original wheel or write to us with the exact model and your vehicle’s year.
Can I order just one wheel?
Yes, all our Autostar wheels are sold individually — convenient for replace a damaged wheel on an existing axle.
