BBS wheels
Jantes BBS
BBS Wheels Rasl'Bitume distributes the BBS catalog, with actual stock displayed
spec by spec. All our BBS wheels are sold individually. Founded in 1970, BBS is one of the few brands to equip both of racing teams and manufacturers in original equipment fitment.
The wheels are manufactured in Germany and Japan. The brand publishes the weight of each of its wheels — a
rare transparency that allows comparison based on more than just the design. Unsure about the bolt pattern, offset, or clearance under the fender? Write to us before
since
The mounting kit: from 4 wheels This is the BBS rule, and it is worth knowing before ordering: the mounting kit — hardware and centering rings — comes with the purchase of a packof 4 wheels
. An order of 1, 2 or 3 wheels is supplied bare.
Pack of 4 wheels Mounting kit included: BBS hardware if the original hardware is unsuitable, and
1, 2 or 3 wheels
Supplied bare. This applies if you are replacing a damaged wheel or if you complete an existing set.
Specify your vehicle
This allows us to determine the appropriate hardware and centering rings. Specify it when ordering, or write to us beforehand.
Why wheel weight matters
by the tire. The wheel is part of the unsprung mass: the portion of the vehicle that the dampers must control over every irregularity and which is not supported by the springs. The heavier it is, the harder the suspension works to keep the tire in contact with the road.
A lighter wheel therefore improves directional stability on uneven roads and reduces inertia during acceleration and braking. This is the field in which BBS has built, with its forged and multi-piece constructions — and the brand publishes the weight for each reference, which few manufacturers do.
Frequently asked questions
Are the hardware and rings included?
The mounting kit comes with the purchase of a pack of 4 wheels. A an order of 1, 2, or 3 wheels is delivered bare. In the pack, BBS hardware is not provided only if your vehicle's original one is not compatible, and the rings centered only if necessary — hence the importance of telling us your vehicle.
What do codes such as CH104 or CH118 mean?
This is the BBS part number, which identifies a precise combination of size, bolt pattern, offset, and finish. It appears in the title of every product page and in the tags: useful if you are looking for an exact reference provided by a garage.
Where is a BBS wheel made?
In Germany and Japan, depending on the range. BBS equips racing teams in competition since 1970 and supplies several manufacturers as original equipment.
How do I choose between two sizes?
The bolt pattern must match the drilling on your hubs exactly. The offset (ET) determines the wheel's position in the wheel arch. The center bore must be greater than or equal to the hub. If in doubt, send us your vehicle registration document.
Can I order just one wheel?
Yes, all our BBS wheels are sold individually — this is standard practice for replace a damaged wheel. Keep in mind that it will then be delivered bare, without mounting kit.
