Fifteen52 wheels
Fifteen52 wheels
Rasl'Bitume distributes the Fifteen52 catalog, with real-time stock shown product by product. All our Fifteen52 wheels are sold individually.
California-based brand founded in 1996, Fifteen52 produces monoblock or forged wheels and works alongside Ken Block. the catalog runs from 16 to 19 inches and is divided into two families: road models and track on one side, and the HD and MX ranges on the other.
Point concret : visserie, bagues de centrage et caches centraux sont fournis with every wheel, at no extra cost and with no quantity condition. Simply specify your vehicle when placing your order.
Unsure about the bolt pattern, offset, or clearance under the fender? Contact us before to order, we will confirm fitment with you.
Two families: road and HD / MX
The difference is not in the style but in the bolt pattern. Two families: road and HD / MX road and track models—Turbomac, Tarmac, Podium, Chicane, Vertex, Holeshot RSR— are drilled from 4x100 to 5x120: compact cars, sedans, coupes.
The HD ranges (Turbomac HD, Traverse HD, Analog HD, Range HD) and the MX ranges (Alpen MX, Metrix MX, Traverse MX) are drilled in 5x127, 6x135, 6x139.7, and 6x130—the bolt patterns of 4x4s, pickups, and vans. The Analog HD is the only one offered in 16 inches.
Reading a Fifteen52 reference
Each wheel has a model name (Turbomac, Tarmac, Podium…) without trim code to decipher: our collections are organized directly by model.
As for dimensions, the usual rule applies: the bolt pattern must match exactly to match your hub bore; the offset (ET) determines the wheel's position within the wheel arch, and the center bore must be greater than or equal to the hub bore—a centering ring filling the gap where necessary. These rings are supplied.
Frequently asked questions
Are Fifteen52 wheels TÜV approved?
Only some: 18 catalog references, all Turbomac or Tarmac models, are approved. The mention appears on the relevant product page. The other models do not do not claim this approval—if you need it for an inspection, let us know before ordering.
What do the HD and MX suffixes mean?
They designate the ranges drilled for 4x4s, pickup trucks, and commercial vehicles: 5x127, 6x135, 6x139.7, and 6x130, while the rest of the catalog ranges from 4x100 to 5x120. First check the drilling of your hubs; that is the deciding factor.
Are the hardware and centering rings included?
Yes. Hardware, centering rings, and center caps are supplied with each wheel, at no extra charge and with no minimum quantity. Specify your vehicle when order: it determines the hardware and the bore of the centering rings.
How do I choose between two sizes?
The bolt pattern must exactly match the drilling of your hubs. The offset (ET) determines the wheel's position in the wheel arch. The center bore must be equal to or greater than the hub. If in doubt, send us your registration document.
Can I order just one wheel?
Yes, all our Fifteen52 wheels are sold individually. Adjust the quantity in the basket: 2 for one axle, 4 for the full set.
