Ström wheels
Ström wheels
Rasl'Bitume distributes the Ström range, with actual stock displayed page by page. All our Ström wheels are sold individually, from 17 to 23 inches.
Ström is a Swedish brand of passenger-car wheels that focuses on l'équipement complet : visserie, bagues de centrage et cache central sont fournis with the wheels. Nothing else to order before you can drive.
Another feature, rarer than you might think: the brand publishes the weight of each of its wheels. So you can compare anything other than the design—our in-stock references range from 8.7 to 18.9 kg per wheel.
Not sure about the bolt pattern, offset, or clearance under the fender? Contact us before you order, we will confirm the fitment with you.
What comes with your wheels
With many brands, the wheel arrives on its own and you have to order separately hardware and rings. That is not the case here.
Hardware
Lug nuts or bolts suitable for your vehicle, supplied with the wheels. Just let us know simply specify your vehicle model when ordering.
Centering rings
Sized to fit your hubs, included with every order of 4 wheels. They fill the gap between the hub and the wheel bore.
The center cap
Matching center cap, always included, regardless of the quantity ordered.
Why wheel weight matters
The wheel is part of the unsprung mass: the portion of the vehicle that the shock absorbers must control over every bump and which is not supported by the springs. The heavier it is, the harder the suspension works to keep the tire in contact with the road.
A lighter wheel therefore improves directional stability on uneven roads and reduces inertia during acceleration and braking. As a reference, an aluminum wheel 18-inch wheels commonly weigh between 10 and 13 kg depending on the width and design—the weight of the tire added to this value.
Frequently asked questions
Is the hardware really included?
Yes, with the centering rings and center cap. Specify your vehicle when placing the order so that we can send you the correct thread and ring diameter.
Are Ström wheels TÜV-approved?
No, Ström does not claim TÜV approval for this range. The inspection French technical inspection does not verify the original certification of a wheel, but whether it need a type-approval document for your insurer, contact our range OZ Racing or Concaver, both certified.
How do I choose between two sizes?
The bolt pattern must exactly match the drilling of your hubs. The offset (ET) determines the position of the wheel in the wheel arch: the lower it is, the more wheel and spring. The center bore must be greater than or equal to the hub. If in doubt, send us your vehicle registration document.
Can I order a single wheel?
Yes, all our Ström wheels are sold individually. Adjust the quantity in the cart: 2 for one axle, 4 for a complete set. This is also what allows you to fit different widths at the front and rear.
