XD Series wheels
XD Series wheels
Rasl'Bitume distributes the XD Series catalog, with live stock shown for each product page. All our rims are sold individually.
XD Series est une marque américaine dédiée aux 4x4, SUV et pick-up, from KMC. The designs—Rockstar II, Outbreak, FMJ, Monster II, Storm, Grenade—are built for off-road use: heavy-duty construction, 6- and 8-lug bolt patterns up to 8x170, and negative offset on 83 of the 194 references. Diameters from 16 to 22 inches.
Each reference lists its maximum permissible load—the key data point on a heavy or loaded vehicle.
Unsure about the bolt pattern, offset, or center bore? Write to us before you order, we will confirm the fitment with you.
Maximum load, to check first
On a 4x4 or pickup, the load per wheel is much higher than that of a sedan—and it increases further with an accessory setup, a loaded bed, or a trailer. Fitting an undersized rim is a serious mechanical risk.
All catalog references state their maximum load, listed on each product page. Compare it with the axle weight shown on your registration grey, divided by two. If the result is borderline, choose the higher margin.
Negative offsets and wider track
A large part of the range is available with negative offset: the rim moves outward, widens the track, and gives the typical stance of off-road applications. The visual effect is immediate, but the consequences mechanical components as well.
A very negative offset increases the leverage on the bearings and direction, and may cause the wheel to protrude beyond the wheel arch—which is not permitted by technical inspection. Check the fitment before ordering, and write to us if you are hesitating between two offsets.
Frequently asked questions
Are these wheels suitable for off-road use?
That is their intended use: XD Series designs its wheels for 4x4s, SUVs, and pickup truck. However, make sure that the maximum load stated on the specification sheet covers that of your vehicle, including modifications and load.
How can I check the maximum load?
Your registration document indicates the maximum mass per axle: divide it by two to obtain the load per wheel. The load rating stated for the wheel must be higher. On a modified or towing vehicle, leave some margin.
What is negative offset?
The offset (ET) positions the mounting face in relation to the wheel’s center. Negative, it moves the wheel outward and widens the track. This is the desired look off-road, but this puts more strain on the bearings and steering, and the wheel must not protrude beyond the wheel arch.
Can I order just one wheel?
Yes, all our XD Series wheels are sold individually — practical for replace a damaged wheel on an existing axle.
