



24-piece polyurethane bushing kit / front + rear axle for VW Corrado / Golf II / Jetta II / Seat Toledo I — TA Technix
Ref. 85VW002-31020
- Secure payment
- 14-day returns
- Technical support
24-piece polyurethane bushing kit / front axle + rear axle for VW Corrado / Golf II / Jetta II / Seat Toledo I
Specifications
Technical details
- Front axle - outer anti-roll bar / - mounting point on the anti-roll bar link
- For models with Ø 20mm anti-roll bar
- Mounting kit for anti-roll bar link / anti-roll bar link inner diameter: 10mm
- Front axle anti-roll bar bearing
- For models with 20mm Ø anti-roll bar, includes:
- Rear axle bushing - axle support on bearing cap
- Replaces the original rubber/metal bushing
- ( illustration 1)
- Front axle - engine mount bushing
- ( illustration 2)
- Front axle - outer anti-roll bar / - mounting point on the anti-roll bar link
- For models with Ø 20mm anti-roll bar
- ( illustration 3)
- Mounting kit for anti-roll bar link / anti-roll bar link
- Between suspension arm and anti-roll bar, inner diameter: 10mm
- ( illustration 4)
- Front axle anti-roll bar bearing
- For models with 20mm Ø anti-roll bar
- ( illustration 5)
- Front axle - inner rear control arm mount
- Replaces the original rubber bushing
- ( illustration 6)
- Front axle - inner front control arm mount
- Replaces the original rubber/metal bushing
- Models with sheet steel control arm
- ( illustration 7)
What this part changes
The original bushing is made of rubber: it filters well, but deforms under load. When cornering or braking, the arm moves by a few millimetres and the geometry changes during the manoeuvre - this is the sloppiness between the steering wheel and the wheels.
Polyurethane deforms much less: the connection becomes precise and repeatable, and the car responds at the same point every time. In return, more road noise and vibrations enter the cabin, especially when cold.
What to plan for
- Install greased with PU or silicone grease - never use mineral grease, as it attacks polyurethane.
- Tighten to the specified torque with the wheels on the ground.
- On a family car, start with the front anti-roll bar before converting everything to PU.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Seat | Toledo I (1L) | — | — |
| Volkswagen | Corrado (53I) | — | — |
| Volkswagen | Golf II (19E) | — | — |
| Volkswagen | Jetta II (19E) | — | — |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

