



26-piece polyurethane bushing kit, front + rear axle for VW Golf I / Scirocco I + II / Jetta I — TA Technix
Ref. 85VW001-3
- Secure payment
- 14-day returns
- Technical support
26-piece polyurethane bushing kit, front axle + rear axle for VW Golf I / Scirocco I + II / Jetta I
Specifications
Technical details
- Includes:
- Outer rear axle anti-roll bar bushing
- Models with a 20.5 mm Ø anti-roll bar
- (illustration 1)
- Inner rear axle anti-roll bar bushing
- Models with a 20 mm Ø anti-roll bar
- (illustration 2)
- Rear axle bushing on both sides
- (illustration 3)
- Outer front axle anti-roll bar bushing
- Models with a 16 mm Ø anti-roll bar
- (illustration 4)
- Inner 22 mm front axle anti-roll bar bushing
- (illustration 5)
- Front axle - rear wishbone mount - inner
- (illustration 6)
- Front axle - front wishbone mount - inner
- (illustration 7)
What this part changes
The original bushing is made of rubber: it filters effectively, but it deforms under load. When cornering or braking, the arm moves by a few millimetres and the alignment changes during the manoeuvre - this is the slack between the steering wheel and the wheels.
Polyurethane deforms much less: the connection becomes precise and repeatable, and the car responds at the same point every time. In return, more road noise and vibrations enter the cabin, especially when cold.
What to plan for
- Install with grease made for PU or silicone - never use mineral grease, as it damages polyurethane.
- Tighten to the specified torque with the wheels on the ground.
- On a family car, start with the front anti-roll bar before replacing everything with PU.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Volkswagen | Golf I (17) | — | — |
| Volkswagen | Scirocco I + II (53/53B) | — | — |
| Volkswagen | Jetta I (17CK) | — | — |
Shipping & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

