Télécommande AccuAir e-level+ Rasl'Bitume

Rasl'Bitume 4.9/5 from 357 customer reviews

AccuAir e-level+ remote control

Ref. AA-3640

519,00 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

Taking control of your air ride

The Touchpad+ is the wired physical controller for the AccuAir e-Level+ ecosystem. It connects directly to the e+ ECU and gives you immediate access to all height-management functions — either through saved presets (1, 2, 3) if you have the Height+ or Pressure+ kit, or in manual wheel-by-wheel mode. Its slim, magnetic stainless-steel housing fits just as well in a custom interior as it does on a standard magnetic mount.

Button layout

Preset
Lowered

Preset
Driving

Preset
Raised

⬇ ALL DOWN

All Down

What each button does

Buttons 1 / 2 / 3 — direct recall of your saved preset (lowered, driving, raised). Requires the Height+ or Pressure+ kit.
↑ ↓ per corner buttons — independent manual adjustment of each wheel (front left, front right, rear left, rear right).
Double press FRONT / REAR — raise or lower the front and rear axles simultaneously with one gesture.
All Down button — immediately lowers all 4 corners with one press.
Compressor indicator LED — lights up when the compressor is running for instant visual diagnostics.

Touchpad+ highlights

🔩

Stainless-steel housing

New slimmer stainless-steel profile, matching the e+ ECU — a premium look in any interior.

🔌

Connectorless cable

Connectorless design — no weak point on the cable. More reliable than a conventional design with an intermediate connector.

🧲

Magnetic mounting

Integrated magnetic frame — compatible with all standard magnetic mounts, such as magnetic phone holders.

💡

Compressor LED

Colored LED indicator that lets you know when your compressor is running — especially useful with a quiet compressor such as a CVT.

🎯

Instant presets

Recall your programmed heights 1, 2, and 3 — lowered, driving, raised — with one press, without using the app.

🔧

Corner-by-corner adjustment

Individual control of each wheel in manual mode — ideal for leveling or fine-tuning your stance.

3 control modes

1️⃣ Preset mode (Height+ / Pressure+)

If you have the Height+ (AA-3641) or Pressure+ (AA-3907) kit, buttons 1, 2, and 3 directly recall your saved heights. The system automatically moves to the target height without you having to hold the button — incredibly simple.

🔀 Manual wheel-by-wheel mode

Without the Height+ or Pressure+ kit, or for fine adjustments, the directional buttons let you control each wheel independently. Hold the button to raise or lower the suspension. Release it to stop.

⬇ All Down + Dual Front/Rear mode

All Down lowers all 4 corners at once. Double-pressing the front or rear buttons raises/lowers the front or rear axle simultaneously — for quick adjustment of the overall stance.

💡

Touchpad+ vs e-Level+ app: Both can coexist on your system. The app provides more information (monitoring, calibration, advanced settings) but requires your smartphone. The Touchpad+ is the physical control that's always available in the cabin, even without a phone nearby. Both complement each other.

Mounting options

🧲

Magnetic mount

Compatible with all standard magnetic mounts. Place it on a magnetic mount on the dashboard, center console, or anywhere in the cabin.

🔧

Panel flush-mount

Connectorless design intended for flush mounting in a door panel, console, or custom trunk — clean, permanent installation.

✋

Handheld use

Designed to be held in your hand — ideal for shows, photo shoots, or maneuvers requiring frequent adjustments.

What's included

🎮

1 × Touchpad+ AA-3640
Stainless steel housing with all control buttons and compressor indicator LED
🔌

Connection cable
Connectorless cable for direct connection to the e+ ECU

⚠️

Requirements: This Touchpad+ requires the AccuAir e+ ECU to operate. Presets 1/2/3 are active only if you also have the Height+ (AA-3641) or Pressure+ (AA-3907) kit. Without these kits, only manual wheel-by-wheel control is available.

Technical data sheet

Feature	Detail
Product reference	AA-3640
Brand	AccuAir
Type	Touchpad+ wired controller
Housing material	Stainless steel — slim profile
Cable	Connectorless (without intermediate connector)
Mounting	Magnetic (standard) · Panel flush-mount · Hands-free
Preset buttons	3 (1 / 2 / 3) — requires Height+ or Pressure+
Individual control	4 independent corners (↑↓ per wheel)
Simultaneous front/rear adjustment	Yes — front or rear dual control
All Down	Yes — all four corners lowered completely with one press
Compressor LED indicator	Yes — colored LED (works with e-Level+ ECU only)
Compatible ECU	AccuAir e+ (required)
Preset compatibility	With Height+ AA-3641 or Pressure+ AA-3907
Weight	2 kg (packaging)

Frequently asked questions

Does the Touchpad+ replace the e-Level+ app?

No, the two are complementary. The Touchpad+ gives you instant physical control from inside the cabin — perfect for everyday use. The e-Level+ smartphone app additionally provides real-time monitoring, calibration, advanced settings, and firmware updates. We recommend having both in your setup.

Do buttons 1, 2, and 3 work without the Height+ or Pressure+ kit?

No. The saved presets (buttons 1/2/3) absolutely require the Height+ kit (AA-3641) or Pressure+ kit (AA-3907) to work. Without either one, only manual wheel-by-wheel control is available — which remains fully functional for managing your ride height.

Does the compressor LED indicator work with all compressors?

The compressor LED indicator works only with the AccuAir e-Level+ ECU — it is the ECU that transmits the compressor status information to the Touchpad+. It is compatible with standard and CVT AccuAir compressors. Compatibility may vary for compressors from other brands connected to the e+ ECU.

How long is the Touchpad+ cable?

AccuAir does not officially specify an exact length, but the cable is designed for installation from the trunk, where the ECU is located, to the cabin. In most compact cars or sedans, it is long enough when routed under the door seals or interior trim. For larger vehicles, such as SUVs and vans, an extension may be required.

Can I use the Touchpad+ at the same time as the e-Level+ app?

Yes, absolutely. The e+ ECU manages both interfaces simultaneously without conflict. You can perform an action from the app and see the result, then make adjustments from the Touchpad+ — everything is synchronized through the ECU in real time.