BBS CC-R 19x8" 5x108 ET45, Gris Anthracite / Poli

BBS CC-R 19x8" 5x108 ET45, Anthracite Gray / Polished

Ref. BBS-65923

215,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

CC-R 19×8" — Anthracite Gray / Polished

5×108 · ET 45

Sold individually German-made

The BBS CC-R

Five wide, sculpted spokes with a deeply recessed profile. The CC-R delivers a more substantial look than the CH-R on the same vehicles.

Technical specifications

Diameter

19 inches

Width

8 inches

Center bore

70 mm

Color

Anthracite Gray / Polished

Bolt pattern

5×108

Offset (ET)

ET 45

Weight

13.1 kg / wheel

70 mm center bore: if your vehicle's hub is smaller, a centering ring fills the gap and centers the wheel properly. Unsure about compatibility? Contact us before ordering.

What's included

BBS CC-R 19×8" wheel (sold individually)
Bare wheel weight: 13.1 kg
Fitting kit (hardware + centering rings) — for a set of 4 wheels

Weight: 13.1 kg

BBS publishes the weight of each bare wheel, which few manufacturers do. This is useful information: the wheel is part of the vehicle's unsprung mass, which the dampers must control over every road irregularity. A lighter wheel is easier to control and also reduces inertia during acceleration and braking.

As a reference, an 18-inch alloy wheel commonly weighs between 10 and 13 kg, depending on its width and design. The tire's weight is added to this figure.

Why BBS

Since 1970

BBS manufactures in Germany and Japan, equips racing teams and supplies several automakers with original-equipment wheels.

Published weight

BBS publishes the weight of each wheel — rare information that lets you compare more than just the design.

Pre-purchase advice

Bolt pattern, offset, center bore, clearance under the fender: we confirm fitment with you before you place your order.

Fitting, hardware and centering rings

With BBS, the fitting kit — hardware and centering rings — is included with the purchase of a set of 4 wheels. An order of 1, 2 or 3 wheels is supplied bare. BBS hardware is supplied only if your vehicle's original hardware is incompatible, and centering rings only if required: specify your vehicle when ordering and we'll determine what you need.

This wheel uses 60° conical hardware, which is standard on almost all alloy wheels. Need individual hardware or specific parts? See our lug nut packs and wheel bolt packs, or ask us for advice.