BBS CC-R 20x8" 5x112 ET17, Gris Platine (CC0101)

BBS CC-R 20x8" 5x112 ET17, Platinum Gray (CC0101)

Ref. BBS-507465

565,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

CC-R 20×8" — Platinum Gray

5×112 · ET 17

Sold individually Made in Germany CC0101

The BBS CC-R

Five wide, sculpted spokes with a concave profile. The CC-R delivers a more substantial look than the CH-R on the same vehicles.

Technical specifications

Diameter

20 inches

Width

8 inches

Center bore

66.5 mm

Color

Platinum Gray

Bolt pattern

5×112

Offset (ET)

ET 17

Weight

13.6 kg / wheel

66.5 mm center bore: if your vehicle's hub is smaller, a hub-centric ring fills the gap and ensures the wheel is properly centered. Unsure about compatibility? Contact us before ordering.

What's included

BBS CC-R wheel, 20×8" (sold individually)
Unassembled wheel weight: 13.6 kg
Fitting kit (hardware + hub-centric rings) — for a set of 4 wheels

Weight: 13.6 kg

BBS states the weight of each unassembled wheel, something few manufacturers publish. This is useful information: the wheel is part of the vehicle's unsprung mass, which the dampers must control over every road imperfection. A lighter wheel is easier to control and also reduces inertia during acceleration and braking.

For reference, an 18-inch alloy wheel commonly weighs between 10 and 13 kg, depending on its width and design. The tire's weight is added to this figure.

Why BBS

Since 1970

BBS manufactures in Germany and Japan, equips racing teams and supplies several automakers with original-equipment wheels.

Published weight

BBS publishes the weight of every wheel — rare information that lets you compare more than just the design.

Pre-purchase advice

We check the bolt pattern, offset, center bore and fender clearance with you before you order.

Fitting, hardware and hub-centric rings

With BBS, the fitting kit — hardware and hub-centric rings — is included when purchasing a set of 4 wheels. An order of 1, 2 or 3 wheels is supplied bare. BBS hardware is provided only if your vehicle's original hardware is incompatible, and hub-centric rings only if necessary: specify your vehicle when ordering, and we'll determine what you need.

This wheel uses 60° conical hardware, standard on nearly all alloy wheels. Need individual hardware or specific parts? See our lug nut sets and our wheel bolt sets, or ask us for advice.