BBS CH-R 19x8.5" 5x112 ET22, Gris Anthracite Titane (CH126)

BBS CH-R 19x8.5" 5x112 ET22, Titanium Anthracite Gray (CH126)

Ref. BBS-507506

€571,99 incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

CH-R 19×8.5" — Titanium Anthracite Gray

5×112 · ET 22

Sold individually Made in Germany CH126

The BBS CH-R

The CH-R is BBS's most widely distributed wheel: a design with five slim twin spokes, a slightly concave profile, and a carefully finished rim. A classic choice for German sedans and coupes.

Technical specifications

Diameter

19 inches

Width

8.5 inches

Center bore

66.5 mm

Color

Titanium Anthracite Gray

Bolt pattern

5×112

Offset (ET)

ET 22

Weight

12.0 kg / wheel

66.5 mm center bore: if your vehicle's hub is smaller, a centering ring fills the gap and ensures the wheel is centered. Unsure about compatibility? Contact us before ordering.

What's included

BBS CH-R 19×8.5" wheel (sold individually)
Bare wheel weight: 12.0 kg
Mounting kit (hardware + centering rings) — for a set of 4 wheels

Weight: 12.0 kg

BBS lists the weight of each bare wheel, something few manufacturers publish. This is useful information: the wheel is part of the vehicle's unsprung mass, which the dampers must control over every road irregularity. A lighter wheel is easier to control and also reduces inertia during acceleration and braking.

As a reference, an 18-inch alloy wheel commonly weighs between 10 and 13 kg, depending on its width and design. The tire's weight is added to this figure.

Why BBS

Since 1970

BBS manufactures in Germany and Japan, equips racing teams, and supplies several manufacturers with original-equipment wheels.

Published weight

BBS publishes the weight of each wheel — rare information that lets you compare more than just the design.

Pre-purchase advice

Bolt pattern, offset, center bore, clearance under the fender: we confirm fitment with you before you order.

Installation, hardware and centering rings

With BBS, the mounting kit — hardware and centering rings — is supplied when purchasing a set of 4 wheels. An order of 1, 2, or 3 wheels is delivered bare. BBS hardware is supplied only if your vehicle's original hardware is not compatible, and centering rings only if necessary: specify your vehicle when ordering, and we will determine what you need.

This wheel uses 60° conical hardware, standard on almost all alloy wheels. Need individual hardware or specific parts? See our lug nut sets and our wheel bolt sets, or ask us for advice.