BBS TL-A 20x9" 6x139.7 ET12, Platine Mat

BBS TL-A 20x9" 6x139.7 ET12, Matte Platinum

Ref. BBS-201105

419,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

TL-A 20×9" — Matte Platinum

6×139.7 · ET 12

Sold individually German-made

The BBS TL-A

A design with very fine, open spokes inspired by motorsport, providing ample clearance for the brake system.

Technical specifications

Diameter

20 inches

Width

9 inches

Center bore

106.15 mm

Color

Matte Platinum

Bolt pattern

6×139.7

Offset (ET)

ET 12

Weight

17.8 kg / wheel

106.15 mm center bore: if your vehicle's hub is smaller, a hub-centric ring fills the gap and centers the wheel. Unsure about compatibility? Contact us before ordering.

What's included

BBS TL-A 20×9" wheel (sold individually)
Bare wheel weight: 17.8 kg
Mounting kit (hardware + hub-centric rings) — for a set of 4 wheels

Weight: 17.8 kg

BBS states the weight of each bare wheel, something few manufacturers publish. This is useful information: the wheel is part of the vehicle's unsprung mass, which the dampers must control over every road irregularity. A lighter wheel is easier to control and also reduces inertia during acceleration and braking.

For reference, an 18-inch alloy wheel commonly weighs between 10 and 13 kg, depending on its width and design. The tire's weight is added to this figure.

Why BBS

Since 1970

BBS manufactures in Germany and Japan, equips racing teams and supplies several manufacturers with original-equipment wheels.

Published weight

BBS publishes the weight of each wheel — rare information that lets you compare more than just the design.

Pre-purchase advice

Bolt pattern, offset, center bore, fender clearance: we confirm fitment with you before you order.

Installation, hardware and rings

With BBS, the mounting kit — hardware and hub-centric rings — is included when purchasing a set of 4 wheels. An order of 1, 2 or 3 wheels is supplied bare. BBS hardware is supplied only if your vehicle's original hardware is not compatible, and hub-centric rings only if necessary: provide your vehicle details when ordering, and we will determine what you need.

This wheel uses 60° conical hardware, which is standard on almost all alloy wheels. Need individual hardware or specific parts? See our lug nut packs and our wheel bolt packs, or ask us for advice.