

Control arm kit with PU bushings for BMW 1 Series (E81/E82/E88) / 3 Series (E90-E93) — TA Technix
Ref. 55BM0017
- Secure payment
- 14-day returns
- Technical support
Suspension arm kit with PU bushings for BMW 1 Series (E81/E82/E88) / 3 Series (E90-E93)
Features
Technical details
- Consists of:
- OEM reference: 31 12 4 036 269, 31 12 6 763 703, 31 12 6 763 707, 31 12 6 769 797, 31 12 6 769 801
- OEM reference: 31 12 4 036 270, 31 12 6 763 704, 31 12 6 763 708, 31 12 6 769 798, 31 12 6 769 802
- OEM reference: 31 12 6 763 699, 31 12 6 769 793, 31 12 6 770 849
- OEM reference: 31 12 6 763 700, 31 12 6 769 794, 31 12 6 770 850
- OEM reference: 31 35 6 765 933
- OEM reference: 31 35 6 765 934
- OEM reference: 32 10 6 765 089, 32 10 6 767 781
- OEM reference: 32 10 6 765 090, 32 10 6 767 782
What this part changes
The original bushing is made of rubber: it filters well, but deforms under load. When cornering or braking, the arm moves by a few millimetres and the alignment changes during the manoeuvre - this is the vagueness between the steering wheel and the wheels.
Polyurethane deforms much less: the connection becomes precise and repeatable, and the car responds at the same point every time. In return, more road noise and vibrations enter the cabin, especially when cold.
What to plan for
- Install greased with PU or silicone grease - never use mineral grease, as it damages the polyurethane.
- Tighten to the specified torque with the wheels on the ground.
- On a family car, start with the front anti-roll bar before converting everything to PU.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| BMW | 1 Series (E81), 1 Series Coupé (E82), 1 Series Convertible (E88) | — | — |
| BMW | 3 Series (E90), 3 Series Touring (E91), 3 Series Coupé (E92), 3 Series Convertible (E93) | — | — |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

