

Control arm kit with PU bushings for VW Polo 6N — TA Technix
Ref. 54VW0009
- Secure payment
- 14-day returns
- Technical support
Control arm kit with PU bushings for VW Polo 6N
Features
Technical details
- Consists of:
- OEM part number: 6N0 407 151, 6N0 407 151B
- OEM part number: 6N0407365A, 6E0407365
- OEM part number: 6N0407366A, 6E0407366
- 1 TA Technix front axle polyurethane bushing kit - rear / inner control arm bushing
- Replaces the original rubber/metal bushing
- 1 TA Technix front axle polyurethane bushing kit - front / inner control arm bushing
- Replaces the original rubber/metal bushing
What this part changes
The original bushing is made of rubber: it filters vibrations well, but deforms under load. When cornering or braking, the control arm moves by a few millimetres and the alignment changes during the manoeuvre - this is the vagueness between the steering wheel and the wheels.
Polyurethane deforms much less: the connection becomes precise and repeatable, and the car responds in the same place every time. In return, more road noise and vibrations enter the cabin, especially when cold.
What to expect
- Install with lubricant made for PU or silicone - never use mineral grease, as it damages polyurethane.
- Tighten to the specified torque with the wheels on the ground.
- On a family car, start with the front anti-roll bar before converting everything to PU.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Seat | Arosa (6H) | 1.0l-8V engine code: AER, AHT, ALL · 1.4l- 8V engine code: AEX, AKV, APQ | — |
| Volkswagen | Polo (6N) | 1.0l-8V engine code: AER, AEV, ALL · 1.3l-8V · 1.4l-8V engine code: AFH · engine code: AEX, AKV, ANX, APQ · 1.6l-8V+16V · 1.7l SDI engine code: AHG, AKU · 1.9l SDI engine code: AEF, AGD | — |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

