

Downpipe / diesel particulate filter replacement tube for BMW 1 Series E81/E82/E87/E88 - engine code N47 — TA Technix
Ref. 06BM002
- Secure payment
- 14-day returns
- Technical support
Downpipe / diesel particulate filter replacement tube for BMW 1 Series E81/E82/E87/E88 - engine code N47
Specifications
Technical details
- Diesel particulate filter replacement tube
- Outer diameter: 63.5 mm
What this part changes
The downpipe is the tube that runs down from the turbocharger. This is where back pressure builds up: the turbine has to push the exhaust gases through a restricted section and often a catalytic converter. Enlarging it frees up the turbine, allowing it to build boost earlier and more decisively - this is the exhaust modification you feel most on a turbocharged engine.
What changes behind the wheel is the response. The turbo takes less time to spool and the power holds higher in the rev range. On a remapped engine, this is the part that allows the ECU to deliver what the tune promises; without remapping, the ECU compensates and much of the potential gain remains untapped.
What to plan for
- ECU remapping: essential to make the most of the gain and to prevent limp mode.
- Without a catalytic converter, the car is no longer road-legal and the engine warning light will come on if no electronic adjustment is made.
- Check the sensor port: single or double depending on the engine; this is specified in the product's technical details.
- Removal often requires access from underneath and removal of an engine mount: plan to use a lift or axle stands.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| BMW | 1 Series, type E81/E82/E87/E88 | 85/100/105/120/130/145/150kW · engine code N47 D20 | 2003–2013 |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

