



Downpipe for Audi A3 RS3 Quattro type 8V, TT-RS Quattro type 8S — TA Technix
Ref. 06AU011
- Secure payment
- 14-day returns
- Technical support
Downpipe for Audi A3 RS3 Quattro type 8V, TT-RS Quattro type 8S
Features
Technical details
- 70 mm downpipe, with 2 lambda sensor ports
- !! Can be combined with 06AU012 !!
What this part changes
The downpipe is the tube that runs down from the turbocharger. This is where back pressure builds up: the turbine has to expel the gases through a restricted section and often a catalytic converter. Enlarging it frees up the turbine, allowing it to build boost earlier and more decisively - it is the exhaust modification you feel most on a turbocharged engine.
What changes behind the wheel: response. The turbo takes less time to spool up, and the thrust holds on higher in the rev range. On a remapped engine, this is the part that allows the ECU to deliver what the tune promises; without remapping, the ECU compensates and much of the potential gain remains untapped.
What to plan for
- ECU remapping: essential to make the most of the gain and prevent limp mode.
- Without a catalytic converter, the car is no longer road legal and the engine warning light will come on if no electronic adjustment is made.
- Check the sensor port configuration: single or double depending on the engine, as indicated in the technical details of the listing.
- Removal often requires access from underneath and removal of an engine mount: plan to use a lift or axle stands.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | A3 saloon type 8V | RS3 Quattro with 294kW · engine code DAZA | — |
| Audi | TT Roadster type 8S-FV | 2.5 RS Quattro with 294kW · engine code DAZA | — |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

