



DPF replacement downpipe for Audi A4 Type 8W-B9 - 3.0l TDI — TA Technix
Ref. 06AU040
- Secure payment
- 14-day returns
- Technical support
Downpipe replacing the DPF for Audi A4 type 8W-B9 - 3.0l TDI
Specifications
What this part changes
The downpipe is the pipe that descends from the turbocharger. This is where back pressure builds up: the turbine has to expel the gases through a restricted section and often a catalytic converter. Widening it frees up the turbine, allowing it to build boost earlier and more decisively - it is the exhaust modification you feel most on a turbocharged engine.
What changes behind the wheel: response. The turbo takes less time to spool and the power delivery holds higher in the rev range. On a remapped engine, this is the part that allows the ECU to deliver what it promises; without remapping, the ECU compensates and much of the potential gain remains untapped.
What to plan for
- ECU remapping: essential to make the most of the gain and to prevent limp mode.
- Without a catalytic converter, the car is no longer road-legal and the engine warning light will come on if nothing is done electronically.
- Check the sensor port: single or twin depending on the engine; this is specified in the product page's technical details.
- Removal often requires access from underneath and removal of an engine mount: allow for a lift or axle stands.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | A4 type 8W - B9 | 3.0l TDI - 218 + 272 hp | 2015–2018 |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

