



Duo Pack VIAIR 444C Chrome Air Ride Compressor – 3.53 CFM · 200 PSI ·
Ref. 9909 2 0519
- Secure payment
- 14-day returns
- Technical support
100% Duty Cycle · 200 PSI
Patented intercooler head · Dry rotor · 1/4" stainless steel fitting with check valve
The VIAIR 444C Chrome is a benchmark 12V piston compressor, designed for the most demanding air ride suspension systems. With a 100% duty cycle at 100 PSI and a maximum pressure of 200 PSI, it ensures consistent performance without overheating. Its patent-pending intercooler head dissipates heat far more efficiently than conventional compressors. Available with a chrome finish, it stands out as much for its performance as for its aesthetics.
The new VIAIR cylinder head incorporates a passive intercooler that dissipates heat during compression. As a result, the 444C delivers the same performance as a 480C with less weight, less heat, and reduced amperage consumption.
-
⚡
The compressor must only operate with a 40A fuse — a higher or lower amperage is not permitted. In multi-compressor setups, each unit must have its own fuse.
-
💧
Install only in an area protected from water and heat — the compressor is not designed for direct exposure to spray or extreme temperatures.
-
🛢️
No lubricating oil required — the VIAIR 444C is a dry-rotor, maintenance-free compressor.
-
🔋
Use only with a battery in good condition and fully charged — insufficient voltage can damage the compressor coil during startup (high starting current).
-
🔩
Ensure secure mounting and good ground-cable conductivity between the compressor and the vehicle body.
-
🌬️
Ensure adequate fresh-air intake — never place the compressor in a completely enclosed space.
Frequently bought together
thread-sealing|tube-cutter-0-14mm|loctite-577-sealant-tube-yellow-50-ml|rubber-grommet|mounting-clamp-for-10-mm-air-hose|10mm-rubber-stopper|mounting-clamp-for-15-mm-air-hose|mounting-clamp-for-6-mm-air-hose|Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

