Everything you need to put your Beetle on air: the complete Gamechanger kit (Bilstein × Contitech struts on all four corners, for link pin front axle and swing axle) and a ready-to-wire STREETEC manual management. One order, free shipping.
🔧 Adjustable front axle required
Fitting the Gamechanger front struts requires an adjustable front axle (torsion bar height adjusters). Also check your axle type: link pin (Beetles up to 1965) or ball joint (from 1966).
STREETEC
Manual management included
Kit contents
🔩
2× front air struts
Specific to the link pin front axle · Bilstein × Contitech
🔩
2× rear air struts
Specific to the swing axle rear · Bilstein × Contitech
🧩
2× front relocators (option)
For plug & play fitting on the front axle.
🧩
2× rear brackets (option)
For plug & play fitting on the swing axle.
🌀
Black stainless braided hoses (option)
Protect the air lines close to the wheels.
📐
Rear spring plates (option)
1" drop or adjustable, depending on your Beetle's year.
⚙️
Air fittings
6 mm (included manual management)
🛠️
STREETEC comp1 compressor
Reliable compressor to inflate the bellows.
🛢️
STREETEC tank1 aluminium tank
Light and strong, an air reserve for quick lifts.
🎛️
STREETEC dual gauge
Front / rear pressure readout.
🔌
Wiring & safety
6 m red cable with fuse, 1 m black cable, safety valve, drain valve and pressure switch.
🧵
25 m of 6 mm PU air line
Plus electrical connectors, fittings and thread sealant.
Technology & design
Bilstein
Bilstein dampers
German dampers tuned to the Beetle's weight and geometry: comfort restored, modern handling.
Contitech
Contitech bellows
OEM-grade rolling-lobe air springs, sealed and durable, to raise and lower the car in seconds.
Plug & play
Bolt-on fitting
With the optional front relocators and rear brackets, the struts bolt onto the original mounting points.
Made in Germany
Engineered in Germany
Developed specifically for air-cooled rear-engined VWs, by Beetle enthusiasts.
Options to choose
Fittings & hoses
6 mm · + stainless braided hoses
Plug & play kit
Front relocators · Rear brackets
Rear spring plates
1" drop (up to 1960) · Adjustable (up to 1960) · Adjustable (from 1960)
How to choose your options
🔌
6 mm fittings
The manual management comes with 25 m of 6 mm line, so the kit is built in 6 mm. The struts have a 1/8" air inlet; the supplied fittings make the adaptation.
🌀
Black stainless braided hoses
A stainless braided hose links each strut to your air line. Near the wheels it handles rubbing, road debris and heat better than bare nylon line, and follows suspension travel without kinking. Recommended whenever the line runs close to moving parts.
🧩
Front relocators
They move the strut's upper mount onto the original shock mount of the front axle: bolt-on, no welding or cutting. Without them you have to make and weld your own brackets. They are specific to your axle (link pin front axle). Reminder: an adjustable front beam is mandatory to fit the kit.
🔧
Rear brackets
They mount the air struts on the original swing axle, with no welding. They are designed for vehicles from 1960 on; for earlier cars, the year you enter on the page lets us check fitment before shipping.
📐
Rear spring plates
They replace the swing axle spring plates and set the rear ride height. "1" drop" (up to 1960): fixed one-inch drop, about 2.5 cm. "Adjustable": adjustable height, in an up-to-1960 or from-1960 version, as the part changed in 1960. "Without": you keep your current plates.
Compatibility
Certificate application list: Beetle saloon and convertible. The Karmann Ghia (type 14) uses the Beetle's chassis and axles, so the kit fits it the same way (certificate valid for the listed models).
| Model | Engine | Power |
| VW Beetle | 1.2 (42005) | 22 kW / 30 hp |
| VW Beetle | 1200 1.2 (11) | 25 kW / 34 hp |
| VW Beetle | 1200 L 1.6 | 37 kW / 50 hp |
| VW Beetle | 1300 1.3 | 27 kW / 37 hp |
| VW Beetle | 1300 1.3 (11) | 29 kW / 40 hp |
| VW Beetle | 1300 1.3 (11) | 32 kW / 44 hp |
| VW Beetle | 1500 1.5 (11) | 29 kW / 40 hp |
| VW Beetle | 1500 1.5 (11) | 32 kW / 44 hp |
| VW Beetle | 1500 1.6 | 37 kW / 50 hp |
| VW Beetle | 1600 (Mexico) | 34 kW / 46 hp |
| VW Beetle | 1600 i (Mexico) | 34 kW / 46 hp |
| VW Beetle Convertible (15) | 1.1 | 18 kW / 24 hp |
| VW Beetle Convertible (15) | 1200 1.2 | 22 kW / 30 hp |
| VW Beetle Convertible (15) | Karmann 1.3 | 29 kW / 40 hp |
| VW Beetle Convertible (15) | 1500 1.5 | 32 kW / 44 hp |
| VW Beetle Convertible (15) | 1500 1.6 | 35 kW / 48 hp |
Frequently asked questions
What air management is included?
A ready-to-fit STREETEC manual management: comp1 compressor, tank1 aluminium tank, dual gauge, wiring and 25 m of 6 mm air line. Simple, reliable, no electronics.
Link pin or ball joint: which axle do I have?
As a rule, Beetles up to model year 1965 have a link pin front axle and those from 1966 a ball joint axle. If in doubt, send us a photo of your front axle.
Is the kit approved?
The complete kit comes with a §19.3 parts certificate (Teilegutachten) for the listed Beetles, valid in Germany. Elsewhere, check your country's rules.
Why give the vehicle's year?
Some parts (spring plates, brackets) change with the model year. We check compatibility with your year before shipping.
Is shipping included?
Yes, shipping of Gamechanger air ride kits is free to France and most European countries (UK excluded).
Legal notice: Installation by a qualified professional is recommended. Approval rules vary from country to country: check them before driving. Rasl'Bitume accepts no liability for improper installation.