OZ Hyper XT HLT 20x9" 5x110 ET29, Noir Brillant

OZ Hyper XT HLT 20x9" 5x110 ET29, Gloss Black

Ref. OZ-156582

684,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

OZ Racing

Hyper XT HLT 20×9" — Gloss Black

5×110 · ET 29

Sold individually TÜV approved Flow-formed (HLT) Made in Italy

The OZ Hyper XT HLT

Designed for SUVs and large vehicles: a wraparound design, high load capacity, and weight reduction through flow forming, where excess weight has the greatest impact.

Technical specifications

Diameter

20 inches

Width

9 inches

Centre bore

65.1 mm

Colour

Gloss Black

Bolt pattern

5×110

Offset (ET)

ET 29

Max. load

950 kg / wheel

65.1 mm centre bore: if your vehicle's hub is smaller, a centring ring fills the gap and centres the wheel properly. Tell us your vehicle model and we'll provide the correct rings. Unsure about fitment? Contact us before ordering.

Maximum load of 950 kg per wheel: check that this figure covers your vehicle's per-wheel load at full weight. This is particularly important for SUVs, vans, and electric vehicles, which are heavier than their internal-combustion counterparts.

What's included

OZ Hyper XT HLT 20×9" wheel (sold individually)
Centring rings adapted to your vehicle — free with any order of 4 wheels
Matching OZ centre cap — always included, regardless of quantity
TÜV approval
Maximum permissible load: 950 kg per wheel

TÜV approval

TÜV certified

This model has TÜV approval: the German organisation has tested and approved the wheel for the vehicle applications covered by the report. It is the most demanding certification on the European market and sets OZ apart from many aftermarket brands. The TÜV report lists the applicable vehicles and, where relevant, the fitting conditions. Ask us for the report corresponding to your vehicle if needed.

Construction: flow-formed (HLT)

Flow forming stretches the wheel at high temperature as it rotates. The material is densified around the tyre bead seat: greater rigidity and lower weight, without the cost of a forged wheel.

This process explains most of the price difference within the OZ catalogue when comparing similar designs and dimensions.

Why OZ Racing

A competition pedigree

Founded in 1971 in Veneto, OZ has equipped Formula 1, rally, and endurance racing teams for decades. Its road ranges inherit directly from this expertise.

European approval

The vast majority of the catalogue is TÜV approved, the most demanding certification on the European market.

Pre-purchase advice

We check the bolt pattern, offset, centre bore, permissible load, and centre-lock compatibility with you before you order.

Fitting and wheel hardware

This wheel uses 60° conical wheel hardware, standard on almost all alloy wheels on the market. Depending on your vehicle, the original hardware may be too short or have a different profile (ball-seat, flat): check this before fitting.

Need the correct hardware? See our wheel nut packs and wheel bolt packs. For a wider fitment, also consider wheel spacers — ask us for advice.