OZ Hyper XT HLT 22x10" 5x130 ET28, Noir Brillant

OZ Hyper XT HLT 22x10" 5x130 ET28, Gloss Black

Ref. OZ-157113

862,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

OZ Racing

Hyper XT HLT 22×10" — Gloss Black

5×130 · ET 28

Sold individually TÜV approved Flow-formed (HLT) Made in Italy

The OZ Hyper XT HLT

Designed for SUVs and large vehicles: a wraparound design, high load capacity, and weight reduction through flow forming, where excess weight has the greatest impact.

Technical specifications

Diameter

22 inches

Width

10 inches

Center bore

71.56 mm

Color

Gloss Black

Bolt pattern

5×130

Offset (ET)

ET 28

Max. load

950 kg / wheel

71.56 mm center bore: if your vehicle's hub is smaller, a hub-centric ring fills the gap and centers the wheel properly. Tell us your vehicle model and we'll provide the correct rings. Unsure about fitment? Contact us before ordering.

Maximum load of 950 kg per wheel: check that this figure covers your vehicle's per-wheel load at full load. This is especially important for SUVs, vans, and electric vehicles, which are heavier than their combustion-powered equivalents.

What's included

OZ Hyper XT HLT 22×10" wheel (sold individually)
Hub-centric rings suited to your vehicle — included with every order of 4 wheels
Matching OZ center cap — always included, regardless of quantity
TÜV approval
Maximum permitted load: 950 kg per wheel

TÜV approval

TÜV certified

This model has TÜV approval: the German organization has validated the wheel for the vehicle applications covered by the report. It is the most demanding certification on the European market, setting OZ apart from many aftermarket brands. The TÜV report lists the applicable vehicles and, where applicable, the fitting conditions. Ask us for the report corresponding to your vehicle if needed.

Construction: flow-formed (HLT)

Flow forming stretches the wheel at high temperature as it rotates. The material becomes denser around the tire bead seat: increased rigidity and reduced weight, without the cost of a forged wheel.

This process accounts for most of the price difference within the OZ range when design and dimensions are comparable.

Why OZ Racing

A competition pedigree

Founded in 1971 in Veneto, OZ has equipped Formula 1, rally, and endurance racing teams for decades. Its road ranges inherit directly from this expertise.

European approval

The vast majority of the range is TÜV approved, the most demanding certification on the European market.

Pre-purchase advice

Bolt pattern, offset, center bore, permitted load, central locking: we'll confirm fitment with you before you place your order.

Fitting and wheel hardware

This wheel uses 60° conical wheel hardware, standard on almost all alloy wheels on the market. Depending on your vehicle, the original hardware may be too short or have a different profile (bulge or flat): check this before fitting.

Need the right wheel hardware? See our lug nut packs and wheel bolt packs. For a wider fitment, also consider wheel spacers — ask us for advice.