OZ Leggera HLT 19x11" 5x130 ET50, Gray

Ref. OZ-105178

715,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

OZ Racing

Leggera HLT 19×11" — Gray

5×130 · ET 50

Sold individually TÜV approved Flow-formed (HLT) Made in Italy

The OZ Leggera HLT

The Leggera HLT combines flow forming with a very open, fine-spoke design. It offers one of the most attractive weight-to-price ratios in the OZ range.

Technical specifications

Diameter

19 inches

Width

11 inches

Center bore

71.56 mm

Color

Gray

Bolt pattern

5×130

Offset (ET)

ET 50

Max. load

630 kg / wheel

71.56 mm center bore: if your vehicle's hub is smaller, a centering ring fills the gap and ensures the wheel is centered correctly. Tell us your vehicle model and we'll provide the right rings. Unsure about fitment? Contact us before ordering.

Maximum load of 630 kg per wheel: make sure this covers your vehicle's load per wheel at full load. This is especially important for SUVs, vans, and electric vehicles, which are heavier than their internal-combustion equivalents.

What's included

OZ Leggera HLT 19×11\" wheel (sold individually)
Centering rings suitable for your vehicle — free with any order of 4 wheels
Matching OZ center cap — always included, regardless of quantity
TÜV approval
Maximum permitted load: 630 kg per wheel

TÜV approval

TÜV certified

This model has TÜV approval: the German testing organization has approved the wheel for the vehicle applications covered by the report. It is the most demanding certification on the European market and sets OZ apart from many aftermarket brands. The TÜV report lists the applicable vehicles and, where relevant, the mounting conditions. Ask us for the report corresponding to your vehicle if needed.

Construction: flow-formed (HLT)

Flow forming stretches the wheel while it rotates at high temperature. The material is compacted in the tire bead area, increasing rigidity and reducing weight without the cost of a forged wheel.

This process accounts for most of the price difference within the OZ catalog when comparing similar designs and dimensions.

Why OZ Racing

A competition pedigree

Founded in 1971 in Veneto, OZ has equipped Formula 1, rally, and endurance racing teams for decades. Its road-going ranges directly benefit from this experience.

European approval

The vast majority of the catalog is TÜV approved, the most demanding certification on the European market.

Pre-purchase advice

We check the bolt pattern, offset, center bore, permitted load, and center-lock fitment with you before you place your order.

Fitting and hardware

This wheel uses 60° conical-seat hardware, standard on nearly all aftermarket alloy wheels. Depending on your vehicle, the original hardware may be too short or have a different profile (bulged or flat): check this before fitting.

Need the right hardware? See our lug nut packs and wheel bolt packs. For a wider fitment, also consider wheel spacers — ask us for advice.