OZ Leggera HLT 20x12" 5x130 ET51, Noir Brillant

OZ Leggera HLT 20x12" wheel, 5x130 ET51, Gloss Black

Ref. OZ-105244

812,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

OZ Racing

Leggera HLT 20×12" — Gloss Black

5×130 · ET 51

Sold individually TÜV approved Flow-formed (HLT) Made in Italy

The OZ Leggera HLT

The Leggera HLT combines flow forming with a very open, fine-spoke design. It offers one of the best weight-to-price ratios in the OZ range.

Technical specifications

Diameter

20 inches

Width

12 inches

Center bore

71.56 mm

Colour

Gloss Black

Bolt pattern

5×130

Offset (ET)

ET 51

Max. load

630 kg / wheel

71.56 mm center bore: if your vehicle's hub is smaller, a centering ring fills the gap and centers the wheel properly. Tell us your model and we'll supply the correct rings. Unsure about fitment? Contact us before ordering.

Maximum load of 630 kg per wheel: make sure this covers your vehicle's per-wheel load at maximum weight. This is particularly important for SUVs, vans and electric vehicles, which are heavier than their combustion-engine equivalents.

What's included

OZ Leggera HLT 20×12" wheel (sold individually)
Centering rings adapted to your vehicle — included with any order of 4 wheels
Matching OZ center cap — always included, regardless of quantity
TÜV approval
Maximum permitted load: 630 kg per wheel

TÜV approval

TÜV certified

This model has TÜV approval: the German organisation has approved the wheel for the vehicle applications covered by the report. It is the most demanding certification on the European market, distinguishing OZ from many aftermarket brands. The TÜV report lists the applicable vehicles and, where relevant, the fitting conditions. Ask us for the report corresponding to your vehicle if needed.

Construction: flow-formed (HLT)

Flow forming stretches the wheel while it rotates at high temperature. The material becomes denser around the tyre bead seat: increased rigidity and reduced weight, without the cost of a forged wheel.

This process accounts for most of the price difference within the OZ catalogue when comparing similar designs and dimensions.

Why OZ Racing

A competition pedigree

Founded in 1971 in Veneto, OZ has equipped Formula 1, rally and endurance racing teams for decades. Its road ranges directly benefit from this experience.

European approval

The vast majority of the catalogue is TÜV approved, the most demanding certification on the European market.

Pre-purchase advice

We check the bolt pattern, offset, center bore, permitted load and center-locking system with you before you order.

Fitting and hardware

This wheel uses 60° conical hardware, standard on almost all alloy wheels on the market. Depending on your vehicle, the original hardware may be too short or have a different profile (bulge or flat): check this before fitting.

Need the right hardware? See our lug nut packs and our wheel bolt packs. For a wider stance, also consider wheel spacers — ask us for advice.