OZ Leggera HLT 21x11.5" 5x130 ET67, Gris

OZ Leggera HLT 21x11.5" 5x130 ET67, Grey

Ref. OZ-105965

878,99 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

OZ Racing

Leggera HLT 21×11.5" — Gray

5×130 · ET 67

Sold individually TÜV approved Flow-formed (HLT) Made in Italy

The OZ Leggera HLT

The Leggera HLT combines flow forming with a highly open, fine-spoke design. It offers one of the most attractive weight-to-price ratios in the OZ range.

Technical specifications

Diameter

21 inches

Width

11.5 inches

Center bore

71.56 mm

Color

Gray

Bolt pattern

5×130

Offset (ET)

ET 67

Max. load

695 kg / wheel

71.56 mm center bore: if your vehicle's hub is smaller, a hub-centric ring fills the gap and centers the wheel properly. Tell us your vehicle model and we'll provide the correct rings. Unsure about fitment? Contact us before ordering.

Maximum load of 695 kg per wheel: make sure this covers your vehicle's per-wheel load at full capacity. This is especially important for SUVs, vans, and electric vehicles, which are heavier than their combustion-powered equivalents.

What's included

OZ Leggera HLT 21×11.5" wheel (sold individually)
Hub-centric rings adapted to your vehicle — free with any order of 4 wheels
Matching OZ center cap — always included, regardless of quantity
TÜV approval
Maximum permitted load: 695 kg per wheel

TÜV approval

TÜV certified

This model has TÜV approval: the German organization has validated the wheel for the vehicle applications covered by the report. It is the most demanding certification on the European market and sets OZ apart from many aftermarket brands. The TÜV report lists the relevant vehicles and, where applicable, the fitting conditions. Ask us for the report corresponding to your vehicle if needed.

Construction: flow-formed (HLT)

Flow forming stretches the wheel at high temperature while it rotates. The material becomes denser around the tire bead seat, increasing rigidity while reducing weight, without the cost of a forged wheel.

This process accounts for most of the price difference within the OZ catalog for comparable designs and dimensions.

Why OZ Racing

A competition pedigree

Founded in 1971 in Veneto, OZ has supplied Formula 1, rally, and endurance racing teams for decades. Its road ranges directly benefit from this experience.

European approval

The vast majority of the range is TÜV approved, the most demanding certification on the European market.

Advice before purchase

We confirm the bolt pattern, offset, center bore, permitted load, and center-lock compatibility with you before you order.

Fitting and wheel hardware

This wheel uses 60° conical wheel hardware, standard on almost all alloy wheels on the market. Depending on your vehicle, the original hardware may be too short or have a different profile (bulge or flat): check this before fitting.

Need the right hardware? See our lug nut packs and our wheel bolt packs. For a wider fitment, also consider wheel spacers — ask us for advice.