







Polyurethane bushings for BMW 3 Series E36 / Z3 / 5 Series E34 / front anti-roll bar bushing with Ø 23 mm — TA Technix
Ref. 84BM019
- Secure payment
- 14-day returns
- Technical support
Polyurethane bushings for BMW 3 Series E36 / Z3 / 5 Series E34 / front anti-roll bar bearing with Ø 23 mm
Specifications
Technical details
- Models with Ø 23mm anti-roll bar
What this part changes
The original bushing is made of rubber: it filters well, but deforms under load. When cornering or braking, the arm moves by a few millimetres and the geometry changes during the manoeuvre - this is the vagueness between the steering wheel and the wheels.
Polyurethane deforms much less: the connection becomes precise and repeatable, and the car responds at the same point every time. In return, more road noise and vibrations enter the cabin, especially when cold.
What to plan for
- Install greased with PU or silicone grease - never use mineral grease, as it damages polyurethane.
- Tighten to the specified torque with the wheels on the ground.
- On a family car, start with the front anti-roll bar before converting everything to PU.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| BMW | 3 Series E36 | — | — |
| BMW | Z3 E36 Series | — | — |
| BMW | 5 Series E34 sedan | — | — |
| BMW | 3 Series E36 (illustration 6) | — | — |
| BMW | 3 Series E36 Compact / Z3 (illustration 5) | — | — |
| BMW | 5 Series E34 (illustration 3) | — | — |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

