



Polyurethane bushings for VW Golf I / Scirocco I + II / Jetta I / outer front axle anti-roll bar bushing — TA Technix
Ref. 84VW004
- Secure payment
- 14-day returns
- Technical support
Polyurethane bushings for VW Golf I / Scirocco I + II / Jetta I / outer front anti-roll bar mount
Specifications
Technical details
- Outer front axle
- Models with 16 mm Ø on the anti-roll bar
What this part changes
The original bushing is made of rubber: it filters well, but deforms under load. When cornering or braking, the arm moves by a few millimetres and the wheel alignment changes during the manoeuvre - this is the vagueness between the steering wheel and the wheels.
Polyurethane deforms much less: the connection becomes precise and repeatable, and the car responds at the same point every time. In return, you get more road noise and vibrations in the cabin, especially when cold.
What to plan for
- Install greased with PU or silicone grease - never use mineral grease, as it damages the polyurethane.
- Tighten to the specified torque with the wheels on the ground.
- On a family car, start with the front anti-roll bar before replacing everything with PU.
Compatible vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Volkswagen | Golf I (17) | — | — |
| Volkswagen | Scirocco I + II (53/53B) | — | — |
| Volkswagen | Jetta I (16) | — | — |
| Volkswagen | Golf I / Scirocco I+II (illustration 5) | — | — |
Delivery & warranty
Frequently bought together
Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com

