Capteur de hauteur null-bar pour AccuAir Rasl'Bitume

Rasl'Bitume 4.9/5 from 343 customer reviews

Rasl'Bitume height sensor for AccuAir

355,98 € incl. VAT

Secure payment
14-day returns
Technical support

🔒 Secure payment 🚚 Tracked shipping across Europe ↩️ 14-day returns 🛠️ Technical support⭐ Rated 4.9/5 by our customers🏁 Enthusiasts since 2017

Why this sensor kit?

Essential for any serious air ride setup, this kit of 4 height sensors is the plug & play solution for interfacing your AccuAir or Level-Ride management system with your vehicle's air springs. Each sensor measures the suspension position in real time and transmits the information to your management controller for precise, automatic, and repeatable height control — front and rear.

4 Sensors included

One sensor per wheel for independent, precise control of all four corners of the vehicle.

🔌

Plug & Play

Native AccuAir & Level-Ride connectors. No custom wiring required.

🔩

Linkage rods

Supplied with each sensor for direct, play-free connection to the suspension.

📦

Complete kit

Screws and mounting hardware included. Everything needed for installation, in a single box.

⚡

Real-time response

Ultra-responsive position feedback so your system can adjust the height instantly.

🔄

Replacement / Upgrade

Ideal for replacing faulty sensors or completing an existing four-corner setup.

System compatibility

This kit was designed and optimized to work natively with the two most widely used air ride management platforms on the market:

AccuAir

Compatible with the entire e-Level, e-Level+, ENDO-CVT, and ENDO-IQ range. Direct connection to the manifold's dedicated ports.

Level-Ride

Native integration with Level-Ride systems. Plug & play, no additional setup required.

⚠️

Recommended check: Before ordering, make sure your management system is AccuAir or Level-Ride. This kit is not compatible with Air Lift Performance (3P / 3H), Airmext, or TA-Technix systems, which use different proprietary sensors and connectors. Not sure? Contact us before ordering.

What's included

📡

4 × height sensors
1 per wheel — front left, front right, rear left, rear right
🔗

4 × coupling rods
Sensor ↔ suspension arm linkage rods
🔩

Complete mounting hardware
Screws, nuts, washers — everything included for installation
🔌

Compatible connectors
Plug & play connectors for AccuAir and Level-Ride

Step-by-step installation

Position the sensors

Secure each sensor to the chassis or body at each wheel, at a stable point not subject to engine vibrations. The sensor's axis of rotation must be aligned with the movement of the suspension.

Connect the coupling rods

Connect each linkage rod between the sensor's rotary arm and a suspension point (control arm, axle, or steering knuckle). The rod must operate without excessive tension at full compression and maximum extension.

Connect the connectors

Connect each sensor to the corresponding port on your AccuAir or Level-Ride controller. The connectors are plug & play—no soldering or modification of the original wiring harness is required.

Calibrate the heights

Start the calibration procedure from your management controller interface. Set your minimum and maximum heights and your driving presets. The controller takes over automatically.

Technical specifications

Feature	Detail
Product reference	RASL-HTSENSOR-KIT
Number of sensors	4 (complete 4-wheel kit)
Sensor type	Angular position sensor (rotary potentiometer)
Compatibility	AccuAir (e-Level, e-Level+, ENDO-CVT, ENDO-IQ) · Level-Ride
Installation	Plug & Play — no modifications
Linkage rods	Included (4 pcs)
Hardware & mounting brackets	Included
Total kit weight	2.5 kg
Recommended use	New installation or replacement of faulty sensors

Frequently asked questions

My AccuAir system is already working—can I replace only one faulty sensor?

Yes. The kit includes 4 identical sensors, but there's nothing stopping you from using only one or two for a partial replacement. The sensors are sold as a complete kit for convenience, but installation can be done one wheel at a time.

Is this kit compatible with all vehicles?

The sensors are universal in terms of their electronic operation—they are compatible with all vehicles as long as an AccuAir or Level-Ride management system is used. Mechanical integration (mounting to the chassis) may require minor adaptations depending on your suspension geometry.

Do I need to recalibrate my system after replacing the sensors?

Yes, recalibration is strongly recommended after every sensor replacement or addition. The procedure is performed directly from your AccuAir or Level-Ride controller interface and generally takes less than 10 minutes.

Can I use this kit with an Air Lift Performance system?

No. Air Lift Performance systems (3P, 3H, Slam Series) use their own sensors with proprietary connectors and interfaces, which are incompatible with this kit. Contact us to find the right reference for your setup.

Is this kit difficult to install?

Installation is accessible to any DIY enthusiast. The electronic part is plug & play, but the mechanical part requires a minimum level of know-how to position and adjust the linkage rods correctly. We recommend having it installed in a workshop on a lift for greater convenience.