STREETEC comp1 EVO Piston Compressor Black – 12V, 200 PSI, with Anti-Vibration Kit
Ref. 9909 2 0679
- Secure payment
- 14-day returns
- Technical support
Compact, powerful, and discreet — 100% duty cycle at 100 PSI · maintenance-free dry rotor · anti-vibration kit included
@ 100 PSI
max.
Air Flow
standard
Matte Black Finish
A discreet, efficient compressor — matte black for installations that blend into the trunk. Simple, no fuss, maximum performance.
Dry Rotor
No oil, no periodic maintenance. The piston runs dry — no risk of oil leaks into the air system.
Anti-Vibration
Vibration-damping kit included as standard. Vibrations absorbed, noise reduced to a minimum — crucial for a neatly customized trunk.
100% Duty Cycle
100% duty cycle at 100 PSI. The compressor can run continuously without exceeding its thermal range at this pressure.
Check Valves
Integrated directly into the ¼" stainless-steel fittings. Pressure remains in the tank even when the compressor is switched off.
Compact Format
Compact dimensions to fit almost any trunk — even those optimized for a flat build.
Matte Black Finish
Matte black for discreet builds or hidden installations in the trunk. Simple, effective, no fuss.
Dedicated 40A fuse
One 40A fuse per compressor, mandatory. No more, no less — a different rating may damage the compressor or create an electrical hazard.
Dry & ventilated area
Install the compressor in an area protected from water and excessive heat. Ensure sufficient fresh-air intake to prevent overheating.
Battery in good condition
The starting current is high. A weak or partially charged battery can damage the compressor coil. Do not cut corners here.
Solid electrical ground
Check the quality and connection of the ground. A poor ground = voltage drop = reduced performance and risk of premature failure.
Multiple compressors in parallel: if you install a dual-compressor configuration, each compressor must have its own independent 40A fuse. Do not connect them to the same fuse.
The compressor gets hot during operation — do not touch it during or immediately after use. Do not allow it to come into contact with plastics or heat-sensitive materials in the trunk.
Dry rotor = zero maintenance: no oil, oil changes, or lubrication required. Just make sure the air filter (if included in your kit) is clean to maintain optimal airflow.
-
⚙️1 × STREETEC comp1 EVO Black compressor
¼" stainless steel main-line fittings with integrated check valves -
🛡️Anti-vibration kit
Vibration dampers for quiet installation
40A fuse not included — it must be installed before commissioning. Without a dedicated fuse, the warranty does not apply in the event of damage.
| Specification | Value |
|---|---|
| Reference | FAHRWairK_comp1_black |
| Brand | STREETEC |
| Type | Piston compressor |
| Voltage | 12V |
| Duty cycle | 100% at 100 PSI (6.9 bar) |
| Airflow | 1.76 CFM |
| Maximum pressure | 200 PSI (13.8 bar) |
| Required fuse | 40A (not included) — 1 fuse per compressor |
| Dimensions (L × W × H) | approx. 27.5 cm × 10.5 cm × 17 cm |
| Fittings | ¼" stainless-steel main line with check valves |
| Rotor type | Dry—oil-free and maintenance-free |
| Finish | Black |
| Anti-vibration kit | Included |
| Weight (packaging) | 6 kg |
Ready to compress seriously?
Have a question about compatibility with your setup, or want to know whether you need one or two compressors? We’re here to help.
💬 Contact usFrequently bought together
thread-sealing|tube-cutter-0-14mm|loctite-577-sealant-tube-yellow-50-ml|rubber-grommet|mounting-clamp-for-10-mm-air-hose|10mm-rubber-stopper|mounting-clamp-for-15-mm-air-hose|mounting-clamp-for-6-mm-air-hose|Enthusiasts at your service
since 2017
A question about your order or your car? contact@raslbitume.com
